Recent content by Blit

I managed to buy another machine WD12 for £21 so now have a few spares. Having changed over the pressure switch, it seems to fill up with water a lot more..... It seems to be working ok at the moment. Will see, but thats to all for the advice and help. Cheers PB

After 4 washes, the fault returned. With a reset carried out then a bang above the door area, it has now completed 2 normal washes..... Is the pressure switch the round item with a tube attached, and a diaphram that moves then you disconnect the pipe and blow into it? The strange thing is...

Strange these snags, especially on washing machines when you don't have the parts at hand to check. I tried disconnecting the thermostat and heating element with a daily wash at 0 degrees c. The fault was the same, so I reconnected them and rechecked the PCB plugs. Now its working, and the...

Hi, The problem is intermittent, more u/s than not but the motor spins ok and all works normal on a lucky run. Cheers PB

Hi, As covered in previous topics, the dial keeps clicking with 8 LED flashes on my Indescit WD12s. This happens on all the programmes after the powder tray has filled, then it sounds as if the water pump is running to drain, although at this stage I would have thought there is little to...

The washing has come out fine no probs. Watch out for those pesky wash baskets and that chamber that can store many items..... Forgive me for stating the obvious but I think the turning of the dial is a universal method of showing something is wrong, with the LEDS indicating something of a...

Many thanks for the tips. It seemed the dial was turning because 'something' wasn't happening without the LED giving a specific number of flashes, (like the motor not turning due to the brushes) By lowering the waste pipe to ground level and managing to empty the water, the spin then...

Hi. Our washer dryer started with an intermittent problem whereby the dial would continuously turn when we selected the usual selection of easy care. It did however work on other programmes, then resumed normal operation for a while until now. The dial problem has since returned at the rinse...