Recent content by bottle04

the tap next to the cylinder works fine iam thinking the air lock if there is one maybe stopping the pump from firing,I drained the system then when I filled it and all was connected thats when the problem started , i do get rumblings and gurgles from the cylinder and pipes?help

hi please help,Iam trying to add on to my current hot water cylinder system three basins and a bath, I have a stuart turner from a relative so i know it works. To the left of the cylinder I have fitted a honeywell and on top a surrey valve,I have come of the surrey valve down to the pump...

how would i know? and how would cure the aiR lock ,thanks

hi the water tank is in the loft and the cylynder and the rest is on ground level? could it be air lock and does it sound connected right? thanks bottle

hi please help,Iam trying to add on to my current hot water cylinder system three basins and a bath, I have a stuart turner from a relative so i know it works. To the left of the cylinder I have fitted a honeywell and on top a surrey valve,I have come of the surrey valve down to the pump...

hi all just fitted new pump,filled system to one bar and the condensing boiler lit for approx 40 seconds then went off. can hear the pump working. i have a red ball shaped mini tank and a big copper cylinder. is their some thing im not doing right?

thanks fornyour help james i m on the hunt for me pump cheers :)

THANKS IT SAYS CP53, are silo anygood or shpild i aviod?thanks

i seen the badge what specific info am i looking at i cant see any 5 or 6 on it its an old myson

hello everyone, i am today resigned to the fact that i must purchase and fit a new central heating pump :? . now i dont know which one to buy so am asking for some advice. wickes do a silo pump.one is 5mm for £35 and a 6mm for £45 are thes any good and what does the 5mm and 6mm matter please...

hi guru can you advise me on a top central heating pump im off to get one today . i notice whikes doing them for 35 for a 5mm and 45 for a 6mm . also what does that mean. the 5mm and 6mm? i think whickes pumps are silo

im off to work on it cheers seco

..thanks tw im off to do it now thanks again..

can you explain that please seco. "engage it with the pump"

what so the nut and spnidle should spin when the spindle is pulled out as far as it can/