Recent content by bowlingo

I could have a 4 channel stand alone dvr on site then dial into it and view what has been recorded from the phone once an alarm has taken place? maybe? Not sure if thats possible however

The system is for inside a commercial premises... I was looking at something like this.. http://www.ebay.co.uk/itm/Aviosys-IP-9100A-Plus-Internet-Video-Server-4-Channel-/191368953677?hash=item2c8e7a7f4d#ht_1585wt_1198 Trouble is I dont know how they work What software/interface would...

Hi all, I am looking at getting a 4 way cctv system of which I would like to broadcast to an iphone... I have a wired internet connection so I would like to connect to cameras to a stand alone webserver if needed (I dont want to use a pc) I would like the cameras to have motion...

Thanks for the reply...what kind of clamp?

Hi all, I am banging my head off the wall here... I am trying to find the correct fasteners of which compress a 58mm outer diameter/50mm inner diameter ribbed flexible hose onto 50mm hosetails (2" pipe)...

yes sorry flat head but need a hole within the aluminium plate to make the heads flush... I have just bought this countersink http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=290602511580 Is this the correct tool for the job? Thanks

Anyone tell me what the best countersinks are for alluminium please?

http://www.toolstation.com/shop/Screws+Fixings/Coach+Roof+Bolts/Roofing+Bolt+M6+x+100/d90/sd1670/p90926 they are M6 100mm roofing bolts I could use a drill bit but it would need to be about 20mm and I am afriad of going to far (8mm thick aluminium) and going through the other side...

Hi all, I am trying to cut these bolts http://www.toolstation.com/shop/Screws+Fixings/Coach+Roof+Bolts/Roofing+Bolt+M6+x+100/d90/sd1670/p90926 into some 8mm aluminium sheet and I need to recess the bolt head only into the aluminium sheet. It is going to be used as a bracket (flat piece...

Do you have another dimmer within the house you can put on it and see if it still does it?

Whatever you attempt make sure the circuit has a 30mA RCD on it. The correct way is to use armoured cable, concentric cable or PVC cable with the same level of mechanical protection as armoured with proper glands and installed within the correct depth (1.5 feet), sand covering the cable...