Does anyone know it is possible to improve the flow rate on a ECOtec824. Can I possibly loose some top end temperature in gain for higher flow rate? Is there some kind of flow restrictor in the cold water supply, if so could I remove this and refit a higher flow rate restrictor on the incoming...
Stripped the DHW HE out today to check for debree from the filter. However came across nothing! I took the flow restrictor out and gave it a good bowing through in both directions. The flow restrictor I would say was way too restrictive but I have nothing to compare it too. The DHW HE was...
Seeing you had that exploded diagram of the DV, you wouldnt have the part no. for the item 9, the filter? Been trawling the web to find it but having no luck. Otherwise I'll pop into parts centre tommo!
Checked the filter on the water side of the diverter valve earlier. What I found was the remains of a filter! All the gauze has gone and the filter is completly useless!
I presume the pieces of filter have got drawn into the dhw h'exchanger.
further strip down required!!!!!
Not a chance I would tell them to replace it, got plenty of life left in it yet. You can get a whole new D valve for £100, new boiler would cost them ten times as much and some!!!!.
I would like to fit them a new boiler as work is work.
Not yet, where are they situated?
My plan was too turn the mains water of and check the cold supply through.
Anothe colleuge of mine said that there could be a restricter on the inlet to the dhw plate h'exchanger.
Not got the model number on me at the mo, I've just disscovered this forum. I thought (wronge probably) that the ecotec with the black controlled panel was the VUW model. so it would be turbomax vux 242 eh, i guess. the diverter valve part no. is 011280.
There is a flat bladed adjustment...