ECOTEC PLUS 428 - MY S53 code seems to be solved!!!!!
Firstly we fitted a gate valve on the HW pipe between the pump & Cylinder and I opened it 2 & a half turns. This slows down the water through the HW system and pushes more through the Heating side.
I also made sure there was no air in the...
WINCHESTER YOU DEMON!!!! :twisted: :twisted: :twisted:
I tried what you suggested and changed the KW rating - since doing that and everything else the guys suggested all seems ok now - NO S53 CODE FOR 2 DAYS NOW!!!.
I am just waiting on Agile to let me know how to work out what the out...
hi "humble heating K"^(^%$
V.Good!!! :D Borewors is going down well!!!! Sorry my ignorance is showing again - how do I find out the total heat output of all my rads, does this have something to do with BTU's & if so how do I work this out???
I read Winchester's post above, the boiler was...
Check out my topic entitled "S53 Code on Vaillant ECOTec plus 428- 28KW Boiler" on Thu Nov 27, 2008 1:35 am. Glad to know I am not the only one still. This seems to now be a very common problem with these
Maybe there might be some info there that might help
Hi Winchester
To my knowledge it has been reset back to 28KW. I will double check this as someone said I should try dropping it to 24KW.
The system seems to run fine as long as the Hot water is on as well. As soon as the heating comes on by itself the s53 code comes up. That is what I am...
Hi Tony/gordonspants
Ya biltong will do :D . Thanks will set it like you suggested, still waiting for the plumber to get back to me, so will show him what you guys have suggested.
Gordonspants - thanks for the suggestion on the website and advice line, just to let you know I still have...
Hi Dave & Tony
Below are the specs for the Cylinder: -
Make = Telford Cylinder
Size = 1500X450mm
Indirect grade 3
Nominal Capacity = 206 Lit
It has a green sticker that says "Part L compliant Product"
This OP has already said she has a LARGE cylinder
P.S. Tony - I see in your...
Hi Guys
Much appreciated for all your help. Sorry for my ignorance guys but most of what you have been saying has gone right over my head.
I will show the plumber what you guys have suggested and see what he says. I have fiddled with the timings on the programmer last night again and set...
Hi all
Please help I am beyond Desperate!!! Sorry for the long post but the more info I give hopefully the more you might be able to help. I moved into a 4 bedroom house last year Oct 07 & had the above boiler installed by a reliable plumber who wasn't corgi registered but had it signed off...