Recent content by Briansmad

LOL, Agile check the user guide you do not need to disconnect any gas supply. If you can use a computer you may be able to download it, maybe read the user guide first. Part P is needed now. But was not a few years ago. I think this site should be re - named to DIY NOT HELPFUL. First page...

Exactly and as I am not stupid! I am sensible and competent I will not be touching or moving the gas connector or pipes in any way shape or form. I am just looking for some help in something I am not familiar with. I value my life and my families. Water/floods can be repaired or fixed. Seems...

I have checked the full system no other valves fitted. No Drayton valve fitted. Maybe there is 2 issues/problems here? Just needs diagnosing, i am happy to cut and solder plumbing pipes i have all 15mm, 22mm, 28 mm connectors, I know the hot water pipes are circulating, and i know the...

Is this a help forum? May be the moderator's should take some control? PLEASE only post if offering some Help! Otherwise stay out of it. I have already had an engineer visit who offered to replace the full system. (A competent boiler engineer would test the various components before...

I can buy a Glow-worm 801310 PCB and Thermostat 800999 for £110.00 and fit myself, Better then paying over £200 from glowworm. This depends on the full exact problem. I can follow instructions / diagrams.

Plumber said we needed a new cylinder or a new combi boiler, £600.00 or £1400.00. I have checked the tank and de-scaled the tank. The system is an Ellison hot water tank, with a cistern on the side and water heating expansion tank that circulates. This circulates when cleaned out but not when...

Thats what we thought, But if we leave the downstairs radiator draining all the time, the boiler will not trip out. It will stay working for an hour. That's why i thought not the control box???

Glowworm back boiler, Inset BBU 40 or 50. Keeps cutting out red light comes on. Plumber said it was the coil in the tank not circulating. But the tank does circulate, it has been de-scaled. Old council house, All radiator pipes come from upstairs, If I run the water out of one downstairs...

A friend wants to build a garage, There are two sewage manhole cover's in garden, Both look to enter one another then run off together out of property. Not storm drains, And not showing on water board plans. Are there any rule's, law's or local planning regulations for adding a concrete...

No other controls, apart from those mentioned. there are NO motorised valves, cylinder stats etc

TOO TRUE, Nothing to see really, The system has a fire, a pump and a back boiler with a thermostat and a timer. Like others in other houses i would think. Apart from you been sarcastic. Each wire is twin and earth, 3amp Power Supply, Boiler and Pump wired to a seven way connection block, Then...

Heating / Thermostat messed up, All has been taken out and wired again, Think it has been wired incorrectly by ME, HEHE. Thermostat Turns Heating Pump on only. I have wired through LP214 and straight to pump, if i wire to pump works, If i wire to LP214 it does not work at all. Wired LP214...

not sure about this? = A note says the contacts are volt free (no power)and to connect live to pin 1 as well. Somehow you need to make the live available. Thermostat is already set to 'G', I read another post about lp112 which said wiring needs to be in parallel nor series. I just followed...

No idea if it has any dip switches. I have never seen them It did say set to G but not sure where they are/were.

Yes but at the moment only the pump powers on when the thermostat kicks in. the central heating light or hot water light on the programmer do not kick in. So the pump will be on 24/7 and only pumping cold water unless i maually turn the hot water on. Thks.