Hi,
I have a bunch of 10mm thick sheet clear polycarbonate. I'm trying to print a 4 colour graphic to the underside of the polycarbonate, so that it doesn't receive damage on the top. The only question is the method of transfer, and the ink that I should use to achieve this at home. Each...
Advice I got was that for my work, since I'm not running a constant supply, I'm able to use a couple of long extension reels from my house. My concern was safety in the case that somehow the insulated cable was damaged, but I've been told that it'll trip a breaker. So as long as both socket and...
Sounds like the right idea. A friend and I decided on a steel support structure last night. I was hoping something would be possible with MDF, since it'd be a lot cheaper, but in the end it's probably just going to be too weak.
Might be on the wrong thread. :)
It's not really a design at this stage. The image just shows what I need. Two points a metre off of a wooden base at which can handle large pressure.
I'm building a platform for a dance video game. The hand rail is the aspect that is causing me the most trouble, as it's ultimately a lever that...
Hi there.
I'm working on a pretty large project at the moment. There's one part of the project that is absolutely doing my nut in. I have a large MDF floor base, approx 50mm thickness, of which I want to clamp two protruding structures, that a handle can be screwed to.
It's kind of hard to...