Recent content by Buckers2024

Just wired it as you’ve drawn and tbe only options on the key panel that turn green once i set it are Log, security and tamper return…. The rest just stay red……. Any ideas ?

Hi pal, right i terminated the resistors as per my picture and still getting a red error light on the key panel. I have set it to “not used” and tried to program the main entrance hallway PIR to do the job of the door contact but still triggers the alarm before i get change to swipe my fob to...

Hi mark, right alarm is up and working pal so cheers. I’ve done test walks throughout the property and each PIR works and picks me up. Managed to setup 4x prox tags too. Changed the walk out time to 20 seconds to arm. When i enter the property the first hall PIR picks me up and instantly sets...

Yeah pal the alarms been fitted in an appartment and the internal bell is outside the appartment door. The old alarm was faulty so i swapped out for this as you can use the keyfobs on the keypad. Thanks for all your replies mark forums like this do work a treat when you’ve got decent lads on it

Cheers mark, that’s black jumper from 0v to TR does that get removed ????

Hi Mark, Going to do this tomorrow morning pal so just wanted to confirm the wiring colours so i don't blow the PCB on the alarm panel: INT550s Scantronic panel R- blue |...

Cheers pal, I’m not there now for a few days so will test and get back to you all. Any telecoms, data, WiFi , broadband stuff I’ll repay the favour to you all…... Take it when you say sounder + and - you mean 12v and 0v connections….?

Hi all, telecoms engineer by trade but usually middle my way around most things…:) I’m trying to wire up a INT500s Internal alarm bell to a new scantronic 10 zone panel with I-ON10-KP. Please see the pictures of my installation and hoping one of you kind forum members can help me out. Also wired...