Recent content by calum95

it sounds like you have mixed the alarm and tamper pair. so each time you open door you are creating a tamper and the system will not set. i suggest you recheck your wiring. look in the panel if you can and see what colours are used for the alarm pair. regards

:lol: alright mate keep your knickers on, im gone

attitude :lol: you never answered my question. earlier on none of you had the decency to reply a simple yes or no to my question and then you started to ignore me that is rude so dont get on your high horse with me about attitude mate. you haven't said anything helpful now go away, i do not...

hi there spark123,all i want to know how much current the speaker draws from the control panel i am trying to work out my total load and im lost with the speaker, having done some research the panel is rated to 1.25 amps and the voltage is 13.7. i now assume the panel is pushing 1.25 watts...

aye i know that genius :roll: can someone who knows what they are talking about help me. for those who have nothing helpful to say shut up and dont reply

can you stop ignoring me and confirm my question

so it draws 250ma then, yes or no? thanks

the 9600 internal speaker output is marked siren. so what does this speaker draw i have already gave you the information thanks

so is my elmdene 20watt 16ohm speaker drawing 250ma on the 9600 or were you just giving me an example :?: again the panel voltage is 13.7v if that helps cheers

:lol:

sorry forgot to mention the 9600 siren terminals (speaker) is 13.7v if that helps in anyway and my speaker is a elmdene 16 ohm 20w speaker thanks. also not relevant but curious will 1125ma be fine on 9600 alarm on alarm mode? thanks

thanks so around 250ma that doesnt sound to bad cheers :)

hi there, i have been searching for answers on alarm 16ohm speaker current draw with no luck so id thought i would ask you experts. i have an elmdene 16ohm 20 watt speaker on my 9600 alarm and im at a loss at how current it draws. the ohms law is very misleading it says the speaker draws 750ma...