Accenta 8 Mini - Tamper Problem

[Dekduffy]

Hi, this is my first post so please bear with me.

I have recently had a new front and back door fitted and decided to replace the old brown door contacts with new white ones. I removed the brown contacts on each door and wired the new white ones identically as before.

When I enter my alarm code to set the system the beep is different and each of the zones (doors) now show a red light.

I have tried to reset and cannot seem to resolve the problem.

Any advice is welcome.

Thanks, Derek

 

[calum95]

it sounds like you have mixed the alarm and tamper pair. so each time you open door you are creating a tamper and the system will not set. i suggest you recheck your wiring. look in the panel if you can and see what colours are used for the alarm pair.

regards