Recent content by caoimho

yes i understand that the 3 port should be on a y plan but it is on my s plan so i need to know how to wire it up correctly .it worked fine before the wiring was dismantled for building work.just need to know the wiring sequence but no diagrams seem available for this

hi i have just wired up an s plan honeywell system according to the wiring diagrams..seemed easy enough only it has wiring for a 2 port hw valve and a 2 port ch valve.only thing is i have a mid position valve on the ch. does this require a movement of wiring? perhaps bringing the white wire...

hi a couple of questions really,firstly is tand g reclaimed parquet better than the non tand g type as i have an option to buy either and seconly ,in my house 1920s, we have 6mm cork tiles on concrete which i plan to remove ,put down a dpm and 6mm ply on top of this ,screw it to theconcrete and...

there is no nut to turn ...just this ribbed type thingy..there is a screw in the top but when this is undone water comes rushing out.

the knob from the other side doesnt fit .its a different type i wouldnt be asking if it were that easy ________________________ moderator caoimho, please note 10a

hi i want to replace a radiator in my kitchen with an exact replica because the paint is flaking off back to bare metal, but i cant seem to turn off the lockshield nut on the return side . the other side has an on off knob to rotate but the other side (when the cap is removed)has a ribbed type...

thanks guys will do that with the olives 8)

i have just cut through a 22mm pipe cos i want to divert it another direction but when i put on the 22mm compression elbow it just slid off into my hand . the olive included. is old copper tubing smaller than new and do i need a specific compression joint or similar thanks :?: :?