Recent content by carl ryder

thankyou ive changed nozzle and the plumber changed the motor last year , the filter is clean , when the plumber was trying to fix it he was convinced it was tank or pipe so we fitted new tank and pipe and filter last year and ive changed filte rot be sure , ive ordered a control box and that...

i replaced the transformer as old one was open circuit this got it runnning

i got a new coil ( and replaced photocell ) and its firing up now however its still sometimes locking out and needing a reset on control box there is no bubbles in the oil pipe what else could cause this ? the only consumebale part ive not replaced is the control box could this cause this...

yes its bad up here but we live on a hill lol

thanks for your reply im in lancashire ive tried plumber we have used and they are closed for holidays its a Danfoss EB14 transformer and ive looked on line and plumbase have them not open till tuesday , im pretty sure its transormer as metered it and open circuit so presume burnt out , if any...

no spark and have metered the danfoss spark generator and it sopen circuit and checked output from control box and 240v there so it looks like coil gone down , being xmas goodness knows when ill get one so frustrating wait now

thanks for your advice ill look in moring and report on here what i see ( or dont )

thankyou not sure where to look for electrodes but ill look in moring i prsume if its not sparking its the coil or control box so i could meter the coil and see if continuity i suppose

can anyone help our hrm oil combi today decided to lockout and wont reset it has happened intermitantly ober last few years and have 2 seperate plumbers trying to fix it they have replaced oil pump , cleaned baffles , set it up , changed oil tank , and the last plubmer has said it needs...