Recent content by Carlos74

Having exactly the same problem, is all workng still with your vaillant wifi thermostat guys? Mine Stopped working over last 24 hours. Have reset router 'virgin', turned off firewall, turned off repeaters so no mesh single router ap. Removed app and added again to both iphones I have. It...

Ok cool and thanks for replying Vinn. Not a modern loft conversion, just victorian one when the house was built I think or and after thought to use the space better. Insulation above is good as it's a plenty deep 'rockwool'. I'm addressing the insulation on the pitchs now deepening rafters...

Hi All, I've a hardboard ceiling in our Victorian loft conversion. It has defacts in some area's and has swollen around the clout nails holding it up etc so not a fully flat nice finish so want rid. I seriously don't want to pull it down as it has insulation on top and also dust from a...

You can hear sensors tick if you get up close to em, helps id any bad ones. I had a faulty one on my a4 b7. I gave it a good power hosing, it worked after. Not sure if a bit of polish or something blocked it but that worked for me.

You or the neighbours have a soakaway anywhere near possibly. Doe's your house back onto others, any services run down between the backs of the house's.

Thanks r896neo. I've had 2 quotes back for the ready mix - 1 @£574 and the other at £320 so quite varied. Gonna try and get another couple. The latter quote offer a barrowing service/laying service that would take the costs to £490. I'm very tempted to go for this and save myself some of...

Hi All, Can someone give me their thoughts on what the materials and process I need to lay a log cabin base. Please see pics of the current location I'm going to use and layout. I'm planning to hire a cement mixer and mix up the base with a friend. The cabin is 5 x 4 m and I plan make a...

Don't use spit, it'll cause bacteria and go back to manky in months. I normally apply the sillicon then spray it with a weak soapy water mix or weak bathroom cleaner/water mix. Then smooth down with your finger to finish.

I'd say the wall needs a skim of bonding coat, then a skim of muilti finish plaster, then tile it. I've try and pull the rest of it off depending if it's pretty loose.

I went with option C recently, I bought a reclaimed victorian hopper of ebay to replace a cracked one I had.

I bought a house which in the survey showed the bay replacement windows had no baypoles. First thing to check if they've put them in when they swopped for upvc. Best to try and track down the company who put in the vpvc. Not sure of a magnet would pick up the baypoles?

Thanks Paul, I'll definitely label the plug and go for the smaller fuse cheers.

I've only played with Mitel's with Mitel controllers at work, all proprietary kit. Remote user's all use Mitel teleworker to connect back to our mbg etc. I'm no voice expert, hopefully someone will come along and be able to help you. Can you get any help from asterix or their forum...

Check this Josh. http://pbxbook.com/voip/sipunifw.html

I know zero about avaya phone's, now if it was a mitel... Doe's it have enough space available on the device for the bin? Maybe rename the bin and remove dot's? Doe's it error at all?