Recent content by cawright1

Anyone have any experience with these window bars/replacement? They are rotting on my summerhouse and the manufacturer sent me some replacement bars. However, not sure how to replace them and concerned about breaking the panes. Any advice appreciated. https://ibb.co/MnF4dKy...

Hi all. Need to remove this rad to decorate. Can't find similar on YouTube so looking for any advice to remove it. Straightforward job? Any pointers appreciated, than you https://ibb.co/Yp00LJ0 https://ibb.co/2YHsxQ0

Thanks. Just bought a switch and it's similar, but different. Obvious how the gangs go though.

Yes, I'm aware of com and L1 matchups but on that switch it's not clear which is the com for the first gang. That's why I asked if my markings were correct?

Thanks. Little confused about the bottom setup there. Would this be the correct grouping for one way X 3?

Thank you. Could you just elaborate on the above a little please?

Hi guys, this 3 way switch controls the main bathroom light, a second light and the extractor fan. Been flashing occasionally when turned on, so seems it needs a new switch. Anything to watch for here or is it just a case of getting a new switch and copying the wire/terminal layout ? (And...

They look great, will get some, thanks. What do you mean by "cover with capping"?

Yes.

Ok, solution please for fixing and burying in wall? Bearing in mind that I cannot replace whole cable run due to accessibility issues.

Hi, ok, got these wagos and box lined up to collect tomorrow en route. All ok?

Yes!

Thank you. Question: if I do use a choc box, should it be wrapped in anything prior to putting a load of filler over it in the channel?

Aargh. Drilled into a wall and managed to nick a live wire. First time I've done such a thing. My assumed fix ... 1) Turn all leccy off. 2) Dig out plaster to get to channel. 3) locate the damaged wire(s) and cut out. 4) rejoin the wires using junction/packbox. 5). Replaster the channel...

Hi all, I need to get a curtain pole up over the doors in my conservatory. The length is around 8 foot. The problem is that there is an rsj right above the door and I can only drill in for about 20mm. I did put one up, but after few days it's come down. Any ideas to fix it back?