Ok, guys, i've been talking to a friend who had previously helped me and told him my error. He sent me this diagram and it made the switch work as a latching on/off. I then connected the switch to LED's so that the button lights up when on...it now all works!
Thank you very much for your quick...
Hi Random,
Yes, I think you're right, I've wired G & V only, thinking they were N/C,COM,N/O, completely my fault. Sorry. Should i re-wire them as the previous diagram i posted and see what that does?
Hi Random,
I've wired up like you said but the button only acts as a momentary switch now. the LED's come on and the button illuminates but only if you hold the button down, rather than as a latching on/off function. Any ideas how to fix it pls? Many thanks!
Yes, SFK, at least it looks that way from the info on ebay:
https://www.ebay.co.uk/itm/263692114891
Thanks for your advice, Random, I'll try that tomorrow. I appreciate your help!
Hi All,
I have a momentary arcade led switch connected to a relay module to make it a latching on/off action to turn on 40cm of 12v led's (plus a single 5mm led bulb) that's powered via a DC cable. I want the LED Switch to illuminate only when the button is pushed on. I've wired it like the 1st...