Recent content by chikoo3030

hi, can some one advise the type of primer I need to use in order to spray in white emulsion few 1 inch X 4 inch discs made out of Sofft wood . Thanks

Thank you for your diagnosis. Is this the "board" fitted to the cover of the Shower? Will replace it and will add my comments thereafter.

Thanks a lot for your prompt response.... I have followed your instructions. Am reading 240 volts between live & neutral on both sides of the "switch" in ON position and 240 volts between live & earth on both sides of the Switch. Am also reading 240 volts on the Live & neutral "connector...

I managed to check the voltage. supply lead with isolator on/ and off and the reads 237volts and the positive and earth reads "0"

I managed to check the voltage. supply lead with isolator on/ and off and the reads 237volts and the positive and earth reads "0"

Thank you once again, I will check it and report to you.

Thank a lot, I used a multi meter to check the AC current and even used an "orthodox" method touching live & neutral with a cable connected to a 40 Watts bulb in a bulb holder to confirm that the Bulb worked.

We have Mira Advance 8.7 ATL Shower fitted on 20 th Jan 2009. The Mira ATL has worked fine all these years (as is only used when our grandchild visits us once every school holidays). Recently it stopped to "Bleep" with "NO lights working" on the cover when the Mains is activated using a pull...

Have a MIRA Advance thermostatic ATL 8.7kW shower fitted in Jan 2009. But used (say 6/7 times a year) Last week when pulled the mains electric cord NO BLEEP SONUD ort Light on the Shower panel turned on. The Electrics "reaches" the Shower but does not Activate it. Any Advise on what can be...

chikoo3030