Recent content by chiwon

thank you gas112. excellent tip after visting several times i decided to try and rig up a tiny ch with some flexi's going onto the flow and return. in the end it was a really stupid cause. someone had isolated the maganclean professional although this never occured to us as the tenant...

i changed the pump as well but did not help. is there any way to check if water is flowing through the flow pipe as the flow pipe does not get hot at all

thank you for the replies. yes i removed the dinky plastic levers that often turn without the metal turning. so isolated the isolatrers with pair of mole grips. the thermostat is on manual overide anyway. besides just to be sure i connected together comm and no so was constant live

i have also released the pressure. then isolated the return by the boiler but left flow un-isolated, then added pressure with filling loop thats attached to the return. which went through fine meaning that it must have flowed back through the flow into the boiler symobilising there is no blockage.

in my boiler i have changed the diverter valve and the diverter motor valve which i have tested, changed the pcb board, i have opened the bleed off of the pump and it spins quite easily with screwdriver i have even manually depressed the pin on the diverter valve for some reason the central...

hi i am having the same issue. can anyone help me in my boiler i have changed the diverter valve the diverter motor valve which i have tested, changed the pcb board, i have opened the bleed off of the pump and it spins quite easily with screwdriver i have even manually depressed the pin on the...