Clodi's latest activity

  • C
    Clodi reacted to opps's post in the thread Fused spur with Thanks Thanks.
    And I believe that is allowed to be a double gang socket but you can't run a single gang off a 2.5mm spur to another single gang socket...
  • C
    Clodi reacted to pete01's post in the thread Fused spur with Thanks Thanks.
    No you can spur once unfused using 2.5mm.
  • C
    Clodi replied to the thread Fused spur.
    Thanks everyone. I did consider extending the ring but, tbh the floorboards are very old and lifting them without damage isn't...
  • C
    Clodi reacted to pete01's post in the thread Fused spur with Thanks Thanks.
    Just use 4mm, no fuse needed then.
  • C
    Clodi reacted to Taylortwocities's post in the thread Fused spur with Thanks Thanks.
    Dig out the existing single box and fit one of these Fit a 13amp FCU on one side and feed the socket (and the add-ons) from ther load...
  • C
    Clodi reacted to denso13's post in the thread Fused spur with Thanks Thanks.
    You could fit the FCU next to the exiting socket then feed the bedside sockets from that.
  • C
    Clodi reacted to SUNRAY's post in the thread Fused spur with Thanks Thanks.
    you could use a face plate and modules https://www.tlc-direct.co.uk/Products/CX404W.html...
  • C
    Clodi posted the thread Fused spur in Electrics UK.
    In our old house in the bedroom there are 2 single sockets either side of the bed that are basically an extension lead running under the...
Show older items
Back
Top