Recent content by Cogsy

So my grant boiler v90 was smelling of oil and also hot water would only work when heating was on. I called my heating engineer and he came to replace some parts but I have a water leak in two places from what looks like the diverter valve (looking at the instruction manual) and this has been...

Apparently there is a leak in the diaphragm and I need a new switch. Thanks for your help I really appreciate it

Thanks for replying. It’s a combo 90 v3

Hi I recently needed a new oil tank after a crack was spotted in my single skinned tank which I have just had replaced. Whilst I was waiting for my new tank to be fitted I ran out of oil and I had the reset light come on. This was pressed a couple of times after the new tank was fitted but...

Thanks assume I won’t need to drain down if I wait until all the pressure has gone as all the water would of leaked over my floor

I can’t seem to screw it down it is leaking a fair bit, are they easy enough to change? My next door neighbour is a heating engineer but I’ve had him in twice already, fitting a new filling loop, and pressure relief valve as that was leaking...

Lovely thank you

C9C0686A-2CDE-4220-A10B-8F46CB361C9D by Cogsy posted 21 Nov 2020 at 5:03 PM Ok So I still have water at the bottom of the boiler which I thought was from the previous leak but it isn’t it seems to be leaking from the top of this, no idea what this bit is though! Any ideas it does have a bar...

Sorry it was the pressure relief valve that was changed.

Hey all I have an issue with my Grant oil boiler losing pressure, this was happening all the time and it was traced back to a leaking pressure sensor which was leaking water all over my floor, this was replaced with a new sensor. ever since every morning I have the low pressure light on and I...