Recent content by COMMMON

ok lads you have made your point i leave it to the experts

no m8 fraid not you see there is a switch sur socket in loft already so wired it with 3 amp fuse direct to boiler so i could fire up boiler the programmer has it own supply in from front room switch spur from old system and there is a spur in airing cupboard of upstairs ring with 3 amp fuse .y

if its just a matter of wiring to the honeywell diagram but only puttin a single wire from wc 8 to boiler 4 i could do that no probs

no the wc is in the airing cupboard with own supply programmer in front room own supply boiler in loft own supply

im not doubting you lot at all i think you all have being a great help to me ive learnt allot much more than they teach you a colledge anyway

so your saying wire it as honey well say but just wire single wire from 8 on wc to vaillant 4 in otherwords .and remove the link

the boiler has its own 3 amp spurred supply also does the programmer and the 10 way box

its ok i wasnt going to do it but found it out on this site http://216.239.59.104/search?q=cache:fTQOzqjf_mwJ:www.gas-news.co.uk/discus/messages/18/1360.html%3F1101037336+vaillant+boilers+wiring+to+y+plan&hl=en&ct=clnk&cd=5&gl=uk&ie=UTF-8

i would do it that way but its a vaillaint boiler m8 3 is perminant live so must use 4 and 5

think ive got it sorted Using cheapo Honeywell wiring center (with 10 terminals) let terminal 1 be negative, and 2 be live. Wire a plug and cord to these terminals and make earth a saperate block connection (call it terminal E) Boiler E, N &L go to WC E 1 and 2. Boiler terminals 3, 4, &5 go...

lovley just goto do the wiring hehehe

HEHEHEHE you make me laugh ive now removed head and turned the valve over waaaaaaaaaaaaaala heat .... lads youve done me proud just got to balence it now thankyou very much for your patiance and help

not sure really dont think so its a new valve suppose i could put a 90 comp bend on and do away with the cylinder to try

yes 3 port valve fitted and ive being switching over manually

removed pump head clean as a whistle