VAILLANT ECOMAX 615 HELP

[gas4you]

Permanent live for boiler from honeywell terminal 1, N =2, E =3, switched live to boiler from honeywell terminal 8 to Vaillant no 4, taking out link from 3 to 4.

What I already posted I think

 

[COMMMON]

im not doubting you lot at all i think you all have being a great help to me ive learnt allot much more than they teach you a colledge anyway

 

[Dan Robinson]

the boiler has its own 3 amp spurred supply also does the programmer and the 10 way box

By that I take you mean a single spur feeds the wiring centre and everything else goes from that?

 

[COMMMON]

no the wc is in the airing cupboard with own supply
programmer in front room own supply
boiler in loft own supply

 

[COMMMON]

if its just a matter of wiring to the honeywell diagram but only puttin a single wire from wc 8 to boiler 4 i could do that no probs

 

[gas4you]

This is a wind up now aint it You should only have one supply to heating system via a double pole fused outlet to wiring centre, everything else comes off this.

 

[Dan Robinson]

I was afraid you were going to say that.

Stop. Turn it all off and get a Part P registered engineer in to do the job properly.

You shouldn't be doing the wiring anyway. Doing it the way you have done is dangerous and could result in some poor bugger getting a serious electric shock.

Book yourself on a electrical course as well as the Honeywell training courses. You need them.


Please - for your own safety as much as anything else.

 

[Dan Robinson]

--------------------------------------------------------------------------------

i am very compitent in doing it just making sure

I think you should reconsider this statement.

 

[COMMMON]

no m8 fraid not you see there is a switch sur socket in loft already so wired it with 3 amp fuse direct to boiler so i could fire up boiler the programmer has it own supply in from front room switch spur from old system and there is a spur in airing cupboard of upstairs ring with 3 amp fuse .y

 

[COMMMON]

ok lads you have made your point i leave it to the experts

 

[Agile]

not sure really

Perhaps he is a little confused?

I dont think he is as compitent as he imagines.