Recent content by compag

Hi all, I have recently but my foot through the ceiling whilst I was up in the loft. I have now patched the hole and have started to fill it, but need to find a way of creating the artex pattern that is on the ceiling. The pattern should be easy to copy, as it is the Broken Swirl Laced type...

Hello, I would be grateful for any advice people can provide on removing the blanking plate that is on my hot water cylinder. I have tried removing it with spanners, but its on there tight, I dont want to put too much force on it, other wise I will split the cylinder. Has anyone ever...

Hi, Both outlets are near the top of the cylinder, the hot water is right on top, with the shower outlet being about 150mm away on the slop of the top of the cylinder. There are two outlets to stop the shower suffering from fluctuation in the tempurature or flow, caused by others using the...

Hi ChrisR, The water is about 60 degrees, thats what the cylinder thermostat is set at. The pump is a branded one, but i cant remember what make. The surrey flange is a bit of an issue, its a home made one, as I couldnt find one to fit the connector on the cylinder. Its a smaller thread...

Hi all, Can someone help with an issue I have on the showers that has recently been I have installed in my house. My shower seems to suffer from airlocks, only on the hot water side. Every morning I have to switch on the shower, and wait a couple of minutes for the pump to force the air...