Hi I wonder if anyone can help me - I am trying to remove the old waste from my bath and cant find a tool to help me - it looks like the previous house owner has glued the nut to the base of the bath and therefore I need to remove the visible part from within the bath first, the try to get at...
Great, thanks for the response. Can I just check, connect wall plug cables to live and neutral (power in) then take boiler neutral to same connection as power in neutral. Live connection then has direct connection to COM. Then boiler live connects to NO. finally use a connector block to...
The connection to the boiler is the red, black, earth one front the thermostat reciever, the receiver gets its power from the plugged in cable I mention.
This fitting is an upgrade from a std timer switch to the salus. The intent is to use the same wiring as worked with the original timer.
Thanks for the prompt response. My boiler is an external oil fired one. Internally the wires I have are a std (old) electrical cable which has black, red and yellow/green coming through the wall. I also have a 3amp fused plug connection to my power socket. I connected live and neutral from...
Hi all, saw previous thread similar but it didn't answer my question, which is that I have fitted the unit, set program and get both red and green lights when thermostat is lower than required temperature. So all looks good, however the boiler does not kick into life. When I bypass the timer...