Recent content by coolkid28

Hi All, Our runners for one of the drawers in the kitchen broke so we tried to find replacment runner and could not, so brough a new draw carcass from B&Q but it comes with no instructions on where to mount the runner in the unit. the runner for the drawer is built into it, so just need to...

Thanks for the Advice, so by reading you comments you don't reccomend a Distribution Amplifier, but either a Masthead Amplifier or a Loftbox would do the trick, Would either of theese be sufficent...

"Ban-All-Shed's" you are clearly one of these useless waste people's time kinda person. Unless your going to contribute, and help people, because funnily enough last time i checked this was a forum. If not then do everyone they helpful honour of FO !!

Thanks....SSE fitted the current Florescent Light, Both ends of the fixture are rubber, and they have pierced a whole through there for the cable entry. Could you tell what the difference is between running from the junction box or running from the exsisting fixture is ? Thanks for your...

The Light is wired to the Upstairs Lighting Circuit, The Cable is from a junction box, No visable grommets on the cable entry.

Hi All, I've Currently got a Florescent Light in our Loft, with the switch downstairs in the Airing Cupboard. How would i go about adding another florescent light in the loft ? It can come on the same time as the current one. Thanks in Advance, Tom

"extremely knowledgeable with good technical support and slightly dearer?" please.

[/url] That makes things much simpler, now just to confuse things ! The Manufacturer of the Amplifier......Blake UK, reccomends hard wiring the amplifer as apposed to plugging it into a socket, So from what you've said i should be able to run a double socket from the socket in the airing...

Great Thanks for that. When we've turned the trip off for the airing cupboard before, nothing else except that socket has turned off, which tell me it's just a spur, not a spur on spur. The cable size to the Socket in the Airing Cupboard is 2.5mm and the Fuse is B16 Just to clarify, so i...

Thanks for that. I noticed on the CSU there's a trip for Airing Cupboard Socket. When i looked at the socket in the Airing Cupboard it has one cable going into it. To me that means it's a spur. Is there anyway i could use that point, so i can keep the socket in the airing cupboard and...

Hi All, I want to / need to put a socket in my loft for a Aerial amplifyer, i'm very compitent in electrics and know what to do, however i'm not sure where to take the spur from for the socket or wether to create a ring. Can someone please help. I need a double socket in the loft, or possibly...

Hi All, I have a New External Aerial, i want to split it (in the loft) to 5 rooms, I've been advised that it's best to amplify the signal, as if your using all 5 TV's at once then you would put a signifcant strain on the signal. I found just your basic 5 way splitters that cost around £4, but...

Thanks, So use the 'F' Type connector at both end's ? Thanks for the link, i'll order some of them. If i had to fit a standard Connector at the tv end, and a 'F' type connector in the loft, would this still work ?? Thankyou

Hi, I'm in the middle of running new coxial cables to my 4 TV's. All the splitters i've used in the past / i've seen in the shop for standard aerial connections are plastic, but i've seen splitters for 'F' type connectors, so was wondering if it was possible to: Use a 4 Way Splitter...