I have had this problem before now on my combi boiler, what it boiled down to was a faulty diverter valve, the valve slides between HW or CH which ever is one demand, I took it apart and cleaned inside and it has worked ever since,
Thanks for the relies I have got it working fully. I place the blue wire from old point 5 to new point 4 and the brown wire from old point 3 to new point 5, new point 2 I linked with new point 3, all works as it should. Again thanks
New Bath 6 jet whirlpool
Chrome Bath Waste
Chrome Bath Taps
Once the bath is installed centre wall to wall, the tiles around the bath will allow me to install the taps through the tiles, therefore no bath drilling will be required.
New shower door 1100mm wide door...
Hi I would like to ask for some advice on the following,
I have a Sunvic Select 107 control unit fitted and wish to replace it with a new Celect wireless thermostat. the sunvic has 6 points to wire against on the backing plate.
1=N 2=L feeds in
3=brown
4=nil
5=blue
6=nil
label on rear...
Hi all
Over the following days and weeks I will be sharing with you all my latest project which is my bathroom. It has been a number of years since I last did a project at home and shared it all with you. I will be showing pictures of my bathroom as it is now, pictures of all the products I...