Hi I would like to ask for some advice on the following,
I have a Sunvic Select 107 control unit fitted and wish to replace it with a new Celect wireless thermostat. the sunvic has 6 points to wire against on the backing plate.
1=N 2=L feeds in
3=brown
4=nil
5=blue
6=nil
label on rear states
1=N feed
2=L feed
3=Com switched with
4=Off
5=On
6=Nothing
The new one states 5 connections as follows
1=N
2=L linked to
3=
4=Heat on
5=Heat off
points 1 & 2 are not an issue, as I don't wish to damage the unit I need to know does my current point 5 (on) go to new point 4 and therefore my current point 4 goes to my new point 5. God I do hope someone understands, any help would be great, thanks
I have a Sunvic Select 107 control unit fitted and wish to replace it with a new Celect wireless thermostat. the sunvic has 6 points to wire against on the backing plate.
1=N 2=L feeds in
3=brown
4=nil
5=blue
6=nil
label on rear states
1=N feed
2=L feed
3=Com switched with
4=Off
5=On
6=Nothing
The new one states 5 connections as follows
1=N
2=L linked to
3=
4=Heat on
5=Heat off
points 1 & 2 are not an issue, as I don't wish to damage the unit I need to know does my current point 5 (on) go to new point 4 and therefore my current point 4 goes to my new point 5. God I do hope someone understands, any help would be great, thanks