Recent content by crtz

Original photo of the jb was what Photo of the original JB was from a while ago. Today’s photo was right after I’ve connected bathroom. I’ve discovered two earths not sleeved for bedrooms and I’ve sleeved them.

Thanks everyone, I really appreciate your support with this. This has worked perfectly and I now have automated sensor based light and kinetic switch at the same time. I just need to pop in to Screwfix to get proper enclosure for the receiver. I’ve also noticed loose connection in the jb that...

Thanks, I’ll try this to be sure.

So this?

Hi there. Just confirming if I can use 2.5 cable for a link.

Thanks. This seems easier, is this correct on my diagram? Can I use leftover 2.5mm cable (only brown - single) for that link? I appreciate yours and everyone else’s help.

Since I have to get that neural single further, ok to have singles in that enclosure (jb)? Just thinking about splitting it so a bit more than currently of outer grey insulation will be off so cable for neutral is longer to reach the spot. I hope it makes sense. Ta

Of course, I will follow this. Thank you. I report back if it works.

Thanks, so it looks like the diagram I’ve created based on information you’ve provided would work? Thank you.

According to the diagram prepared by another user above, it should have live. It’s already supplying live to pull cord, or not?

Thank you. This example makes sense for me. I think the easiest will be to do what I’ve attached. It matches version 1 of 3 examples image. Is this correct? :) changed to s2 and l2 as this is exactly as they are for bathroom light. Was going by 1 as it was easier.

This is what I mean:

So you’re trying to say this would work too? Of course I got l1 confused here. I did take a look at your diagram and I will try it if I won’t get confirmation that below will work too.

Might be but that’s what I’m after. WiFi fan allows to monitor humidity, temp and works great right now. I don’t like pull cord so I’d like to change it to WiFi switch that can be controlled on a wall (kinetic) or in automations.

I don’t want to have separate pir. I’ve bought an extractor fan that’s smart and has ir sensor, Alexa control etc. Once I have kinetic WiFi switch, I’ll link this together in the app only as an automation and it’ll act as pir - having auto lights and auto fan.