Recent content by dalejg

Thanks, I think this will work.

I was going to have a look at all the wiring.

Yes, the wire runs down from the ceiling in to the double socket as you can see then runs down to a socket below for the washing machine.

I have read the guidelines and I thought they can run vertical or horizontal so would still be classed as in zones?

We have altered our utility room slightly and moved the sink into the middle. I now need to move one socket over to the left side underneath the boiler. Problem is I can't drop the wires down vertically from above as the boiler is in the way. In the photo you can see where the socket is and I...

I plan to replace my Potterton Netaheat boiler vented system. It is for a 4 bed house and was wondering what boilers do you recommend as a replacement.

All done now.

Best way is to move the air separator up a little to give me the extra space I need on the pipe above the pump. As by moving the pump down it is still going to be to tight.

Oh, I see what you mean now. It should not be upside down. It has been like that since we bought the house in 2010. It has worked ok. It occasionally sticks when the central heating has not been used in along time.

What do you mean comment on the 3 port valve?

I did see on a diagram you can mount the filter either before the pump or after. So you saying I should lower the pump aswell to add more room for the filter connections.

Trying to find the best place to place my filter. I cannot do it by the boiler as the pipes run straight into the ceiling. It is an open vented system with hot water tank. In the airing cupboard I can mount it after the valve on the central heating side. This does mean that the water will only...

Pipe work in airing cupboard

Pipes

Just to let you know, i decided to strip the pump down and replace the seals, as at the end of the day it is only a seal that is worn out which would happen on any pump eventually. The shaft was not damaged and there was no marks on the shaft. Managed to source the seals for the pump for...