Recent content by DaleW

Thanks for this stem. I am going to wait until the summer and take a look at getting this sorted as you are correct, we could only have hot water if either the heating has been on or the immersion was switched on. This is a pain as you can imagine but for now, all we require is the heating to be...

Many thanks for the help on this Stem and EST. Installed the hive unit using the diagram you provided EST and the system and hive are fully functional again. Tested both manual mode and automatic from the Hive unit and all seem to be working as expected.

Thanks so much for this. So if I was to wire it the same as the diagram you have given it will give me the same results as I have now? We arnt too fussed about the hot water control as we have lived with it this way for 6 years now. We are more focused on having the ability to control the...

Thank you for the reply. The system is isolated 100% as I have been switching of the main circuit breakers and have been touching said wires and I am still here :LOL: If the wires coming from the unknown source is for the pump how would I incorporate this into the hive unit including the wires...

Update So Today I took a closer look at the wiring and have the following image of the wiring setup Hopefully this makes it clear now to how the wiring is setup and should give an idea of how the Hive Mini could be wired up. It appears that the Red and Yellow wires from the cable I cant...

Thank you for the response. It's always been the case that we don't have any control of the hot water unless using the switch to turn on the thermostat or the heating is/has been on. I've just taken more of a look into the wiring as a whole from boiler to all units in the same area. From the...

Update for you there is a black cabe going into the NO1. Does this make things clearer as to what need to be done?

The system we have currently is controlled by the time guard. We have times set for when the central heating will currently come on and can set this to always on so that the heating will be on until turned off. This used to be controllable with our wireless thermostat. We only get hot water to...

Good morning, Thank you for the response on this Stem. I have not moved any wires as when I opened the box and saw this mess I just closed it up and thought I would seek advice. The Time Guard doesn't control our hot water but only controls the heating or it does but never worked :LOL:. The...

I have recently purchased a Hive Mini to replace the thermostat that I had previously been using for years which gave in. I am struggling with the wiring on this. My boiler is an Ideal Logic Heat 24 (Heating only) boiler so I have purchased the Hive mini Dual Chan. I am struggling with the...