like the last person said the sizes are internal different makes use slightly different sizes. glued and pushfit are different eve nfi made by the same people pushfit seems to bend more glued seems to be rigid
i know the gas meter boxes have to be outside now , this is due to the fact that they want to fit medium pressure to all homes in the uk. medium pressure meters have to be fitted outside due to the pressure if one was to leak. i think electric is put outside for another reason also another...
45cm is a bit much for a offset pan i knowwhat you mean about making a s shape bit between them but that would look crap and slow the waste water down alot. could you fit a soil elbow to the pipe coming out of the wall a short bit of pipe then a bend pan connector dunno if that makes sense but i...
thats what gas safe told me :) and potterton and baxi and a few others first thing they say is whats the standing pressure and meter and boiler cause if it is more than 1mb they say its a pipe sizing fault straight away.
with that type you have to remove the cistern to take the part out i would advise you to look for one that is removeable without removing the cistern when you fit the new one also if it has a fixing plate below the cistern change that at the same time.
i know this sounds stupid but try and hit the outside stoptap with something to make it leak into the street as this is deemed to be a emergency :) i got told that from a engineer a while back but becareful not to get wet :)
ID and riddor plus slap you for thinking you can fit a new boiler to a old flue :) what do you want your life or a cheap fix ? plus if it is condensating boiler the old flue would rot away due to the water vapour that comes out the flue:)
are we talking about standing pressure at the boiler here if we are the boiler should be no monre than 1mb less that what is found at the meter if it is the boiler shouldnt of been turned on in the first place.but most boilers can work at very low pressures now i fitted a baxi that could work at...
i have seen on some stats that the heat sat terminal 2 can be used for a little red light on the front of the roomstat/programmer so it comes on when boiler is on and off when it is off