Recent content by Danns

Its going to be a bit of work, but looking at the other wonderful period features you have, I'd be going with, move pipes slightly further into corner and then cover with a curved/radius'd cover. I did the same for both water main riser in one corner of my lounge and rad pipe drops in the...

After looking at the Hyundai generators before, if memory serves me correctly they are just rebranded Chinese generic models, can get the same branded up as black and decker etc. Hyundai Power Products is a trading name of another company who also own JCB tools (again questionable quality)...

A lot will chime in telling you to "leave it to the pros" or "hire a floor sander". First off, make sure all boards are secure, For last room, I went all out with screwing all boards next to the original nails and then plugging / sanding flush with a plug cutter set (check for services first!)...

Afternoon all, as always can never find an exact existing thread / discussion where I dont feel like im making one too many assumptions. Can I get a quick sense check on the below, always wanting to work 1 step ahead, eventually planning to add an en suite to the loft conversion. Got the...

Interested on thoughts on this; I'm at a stage in house renovation where it would be least disruptive to do this, I'm interested on thoughts on the following as its gone around in my head too many times. I've got a 14kw (4kw elec) ecodan (monobloc) ASHP, I've reduced the energy use from 15Mwh...