Recent content by darren6645

There's a joist running parallel to the back wall and then at approx 420mm there's another parallel joist then at approx 220mm from that there's another then they go back to 400mm centres across the rest of the bathroom.

My apologies you are correct the floor is t&g chipboard not osb. I've been looking at osb and put that by mistake.

I agree with what your say I'll check tonight when I'm home. Thanks.

Yeah the bath will be similar weight but with this being free standing and the other bath sitting on a frame around three walls, I was thinking the load would be different or maybe I'm not understanding it properly?

I don't think there is but I'll check that and the osb when I'm home, thanks.

Looking at fitting the bath below. It will be going where the previous bath was which was p shape with a sliding enclosed screen fitted adding approx 20kgs to the weight of the bath. The bath was sat on a timber support on three sides as well as the 4 supporting feet below. This bath is 1500mm...

Hi, my apologies. The original controller was a Landis&Gyr RW8270 as you say it was 2 channel one for hw to heat thermal store and the other for ch. That programmer wouldn't physically allow you to set the ch on time outside the hw on time, as we have already said because you need the hw on to...

snb1 are you suggesting it shouldn't be in gravity fed/part pumped setting? In both settings and prior to the hive I have had the hw set for all day then the boiler and circ pump will kick in based on the store temp. The ch is only ever scheduled to be on within the hw on period (previous...

That sounds like an easy fix, that's great news. I'd be happier knowing it's set correctly, thanks for your help I'll have a go at that now

I have a 180l flowmax thermal store, water heated by my boiler circulated by pump local to tank and returned to storage. This store water is used to heat radiators when ch selected circulated via a second pump. I have mains pressure hot water via an internal coil in the thermal store and...

Excellent! That's what we thought but not too familiar with the system and owner left no paperwork so thought best to ask.

My son has just moved into a house with some issues with rads leaking etc We have sorted all of them minor issues but now need to bleed and balance the system. His boiler is logic system s30 but has no filling loop in the usual place, under boiler near flow and return or anywhere to attach a...

Hi mate. I've done as above and soapy bubbled the schrader valve, it's defo passing so I've fitted a whole new E/V I appreciate your help and advice thanks for your quick replies and assistance

I pressured it up on the pump gauge to 3bar last time but when the pin was pressed today no air. Cold supply is 100% clear as everything is working fine in that respect. I'll give it another try in the morning

I've pressed the pin with the water still on and no water or air came out. I had previously pressured it up as above a few weeks ago so seems to have lost pressure but not passing water?