Recent content by davemcd

Thanks very much for your reply, but I already have open/closed set in reporting but still no notification of alarm active I'll probably leave it at that because the chances of it happening whilst were away from the house is very unlikely Thanks dave

Just to say a big thank you for your (secureim and handymanjo) help with my gsm issue, it's now working ok after changing the sim card to Vodafone. I incorrectly assumed that everything was ok because of receiving replies back from the panel (status, arm darm etc),but not an alarm message. I...

The panel was set using a tag and the following was on the log file after generating an alarm PROG START USER 00, ALARM ABORT, SYSTEM DISARMED TAG 06, ALARM ACTIVE,BELL ACTIVE, RECENT ARMED, ZONE 13 (MY BACK DOOR SENSOR) I'm not using the 2400 modem could there be some settings in UDL SETUP...

Apologies for the delay in reply the sim card i'm using is tesco with credit and if I send status I get a reply "printer header" followed by "armed" or "disarmed" and setting/ unsetting the alarm with mobile works fine,but no reply when alarm triggered. SECURE I AM Under digi options item 7...

Hi looks like everything is setup as your instructions still no text,it's funny that if i set the alarm with a outside door open it sets the alarm condition. Shall we continue tomorrow dave

Hi Handymanjo, Thanks for your response,I'm using keypad Dave

Thanks, but not sure where I find areas a,b,c,d?

HELLO, I'm hoping somebody could please help to help resolve a problem with a Texecom 24 and Texecom com GSM modem' the GSM works fine and responds to commands to from my Mobile phone (Satus, Arm, darm, and sending MESS etc, but it will not send any alarm details after I trigger an...