Recent content by dbeevers

ok, got it, all new to me this.

Hi Here's how its installed in the cupboard, same place as the pro installed Stirling 10 I just took out. Now you've mentioned about heat and the batteries, my genuine question is, What about bell box batteries when its south facing, the last bell box was up for about 9 years and never had a...

No tank, just what it was.

I've got my panel in the airing cupboard upstairs and an arming station by the door and all seems to work well and main panel is easy to get to. Before you install it all, I would put the panel and detectors roughly in place and scan to make sure the wifi signal is ok.

As I put earlier, I took all the pet sensor parts out and alls good. Our little dog goes into the extension and with the glass door shut we haven't had any activations as yet.

Here's both options

I've realised my error in wanting to use them :LOL:

Problem with instructions is they vary, the ones that came with the Deltabell X are different to the ones in the kit.

Hi We do have a small dog but she's in the extension if we go out, we have a glass door between the dining room and extension, if I took the pet filter off is it possible it could trigger? Did walk test in engineers mode and got my other half to walk around, 1 out of 3 triggered, living room one...

Hi, Thanks for replying. Bench test was basically getting everything together and programmed and tested before installation as I'd only ever done a Yale system before. It was all good and testing was fine. All pir's show excellent connection in their final position. Even waving in front of them...

Hi Just installed a Pyronix enforcer system with 3 KX10DP pir's. All the system was fine when I bench programmed and tested it but now the pir's are in the rooms they don't seem to trigger as expected if at all during the walk test. Living room one is fitted in a corner 2.3m from the floor...