Nice post Ian. I moved, so apologies for not updating my details for you. My jurisdiction shouldn’t make any odds to my question- the question is universal in terms of what is correct wiring etc. Anyway- disney matter- Exedon was very helpful. Seasonal efficiencies to all.
I’m not sure, but I assume so. He said having the mag one fitted increased the guarantee to 5 years… but he also said he had a good spark
Grant don’t seem to have a viewable register here in NI…. Not one grant registered installer as far as I can see. I do know a guy who does all their...
I mean speak to the plumber to get the lazy spark back. If he doesn’t want to chastise his plumber then he can pay me back what I gave him for the electrics and I’ll do it myself or get my sparks neighbour in to do it
I guess a cats breakfast looks like a Dogs dinner…
And I agree completely. Strangely the installer is well thought of locally and I was put off using several others because of their bad reps so who knows what they’d be like 8-|
I was expecting them ( plumber and mate) to take the pipes through...
Exedon,
As per pictures above it is clearly not wired correctly just a twin and earth to the boiler off the programmer switching. No wires back to the wiring centre to feed the pump nor heating valve either obviously…
I’ll have to get on to the plumber next week and get the spark back...
Hi exedon, mine is the 15/21 which is a tightly fitted unit and why I chose it as it was going on a walkway of 900mm and only taking up 400mm all in. I’ll get a look at the wiring tomorrow and if it’s no right I’ll get you it sorted.
But I guess my main question is how can I tell if there is...
Using a ballofix is a slightly more expensive way of doing it unless it was the last isolating point in what was being removed. As conny said- a push fit stop end would be a more normal way of doing it. You can always put a bit of pipe into the open compression end of the valve and nut it tight...
Hi yukster,
They are cut nails as jobandknock says. I’m a London born chippie and never heard them Called Brads except on the discovery channel. Drilling a hole may help get them started. If you are redoing a floor and want cut nails for aesthetic reasons then fine, if you are just refixing...
Just the boiler really, the house is reasonably well insulated and I spent an hour insulating the external pipe work- mostly inside the boiler plus the 30mm between house and casing.
Is what I said above the east way to test that it has or haven’t been wired correctly in the first place...
No pipe stat visible on the return. I know as I opened it up today to see naked bits of pipe and a condensate pipe knked so badly it would probably not let by. That said I believe the vortex frost stat is built in….
3 motorised valves hot water and 2 heating zones up/down.
No idea on system...
Hi Ian,
I know it requires a permanent live, what I am trying to work out is (without paying a spark to come and look at it) how can I check if it is wired correctly??
Again, optimum seasonal efficiencies to all ;-)
Another thing is that the ‘boiler on light’ on the control panel only comes on when heat is called for.. which I assume means there is no permanent live…