Recent content by Devonion

The old boiler was an Ideal Mexico RS90 with SMC control pack but was not economical

Many thanks for your advice re temperature differential. The HW was the only demand on the boiler when I quoted the recovery times

Thanks for your advice. The cylinder is pretty old-I guess over 15 years. Could you recommend any make with rapid recovery rate heat exchanger? I would prefer a similar copper cylinder so to keep pipework to a minimum in a very restricted area

Recently had a new boiler installed Worcester Greenstar 30 Cdi regular retaining the same cylinder Telford 42x18 indirect. The recovery rate to reach temp.of 60 degrees is now 3hours with the boiler set at 5 giving flow temp. of 65degrees. I would appreciate any advice to speed up recovery...

I am very grateful to all who has given me their advice which I very much appreciate I am very sorry in that I did not make my request as clear as it should have been which was the correct position of the return connection from the central heating bypass. This will be connected downside of the...

Should the return connection be the last connection to the boiler or should the DHW connection be the last connection as normal