Recent content by DIYCustard

Thanks sparkymarka I will update once all fitted. Now purchased some roof bars so can get my ladder up to the Brother in-laws house.

Yes I believe so, the Data sheet for the Texecom Odyssey X that I have ordered states Part: -WDD-0002 Name: - Odyssey X Description: - Grade 3 Sounder. Volume (SAB mode at 13.7VDC) = 115dB(A). The manual states: - Grade 3 Sounder & Strobe Unit Twin Piezo. I down loaded the Installation Manual...

Ok Sparkymarka Did I get the cables correctly connected on my diagram above between the panel and bell box? The diagram showing the jumper settings is this correct?

Thanks sparkymarka for the clarification. One Texecom Odyssey X and cover ordered. So lets see if I can get the connections correct? Is there any reason way the cable colours have been connected to the panel terminals in this sequence? For a layman like me it does not make any logical sense...

New Bell Box Stuck again – thought it would be easy to get a bell box per the ones recommended on this forum and illustrated on the alarm panel box AG3, 6 & 8 are obsolete. Reson8 is available but reviews state LED cannot be seen in daylight? Texecom Odyssey Range appears to need an eight core...

Finally got back to the brother in-law’s alarm. Kept all the Tamp etc, links in per instruction manual. Confirmed sensor 8 – porch, including siren in external bell box not working, although strobe functions. Put link in 7 and 8 per sparkymarka suggestion - FIRE FAULT LOCKOUT! Disappeared...

Thanks everyone - Happy new year to you. I will get pictures of the wiring next time I'm at my brother In-law - most likely this weekend. thanks for the tip to put a link in 7 and another in 8 I was not sure if I could do that, or the effect. Re-setting the whole system was going to be my next...

Hi Andymanjo yes I agree it does sound like a incorrect program setting at first. But I have been through the installation manual cover to cover three times, making sure everything is set up as explained. Also as I now have a “fire fault lockout” which I am assuming is a incorrect signal back to...

On the circuit board top left hand side are 3 terminal blocks marked +13V - 0V - Fire. Brand new complete alarm panel and LCD display from Amazon. Only Swapped out circuit board and just in case something had changed the separate LCD display unit.

Hi Secure I am, thanks for looking at my question. No it is the old failed board - thought it was worth showing a picture. as stated " Swapped burnt out circuit board pics below for a new one"

Swapped burnt out circuit board pics below for a new one + new battery, each wired connection swapped over. Factory bridges refitted connected wires removed. Nothing is connected to the fire sensor terminals (top left). Intruder sensors are wired into terminals 7 and 8. Prog setting all fire is...

House alarm Accenta / optima G4 Mini

House alarm Accenta / optima G4 Mini