Recent content by Donnawg

Yes Micky, will do. We've only been turning it on to check if anything has worked, but it's off atm.

Thank you Micky. Do you have an idea of how much these cost? I'm thinking, even if we have to get someone in to change it, I'd like to have an idea how much I should be charged. Thank you.

Okay, my oh opened it a little and rammed it shut and tried turning the inlet tap on again and the pressure is still rising pretty fast. Could the filling loop be broken? Could that cause it do you think please? Thanks.

:D Thank you. I'll see if we can turn it any further round.

The filling loop is turned off fully already.

Aah, thank you, so that would probably be why it had been falling slightly anyway! Right, I'll get that sorted. But, if I bleed the radiators, with the water going through the inlet tap, the pressure doesn't seem to stop going up. We took it down from 3.0 to 1.0 with the tap off, turned the...

Sorry, I didn't make the bit about the leaks very clear at all. The leaks only appear when the pressure gets very high, one when it gets to 3.0, which our manual suggests is what is supposed to happen, and the other one is when it gets a couple of notches higher than that from the reduced...

Hi. We have a Glow-worm 24cxi combi boiler. The water pressure had lowered a couple of days ago, so as usual, I raised the pressure very slightly (as I have done on several occasions), but when I closed the valve when it reached 1.0, the pressure kept rising and stopped at 3.4. This caused a...