You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser.
-
D
DP replied to the thread
Beko DCU 8280.
Relay soldered onto the board. Coil resistance is tad over 700 ohms. Defect possibly the contacts are worn out switching inductive load...
-
D
DP reacted to
jj4091's post in the thread
Beko DCU 8280 with
Thanks.
If you cannot meeasure a voltage across the coil pins in the socket then you should be able to tell if it's energising by pulling it in...
-
D
DP replied to the thread
Beko DCU 8280.
Thanks for posting
Float operates a microswitch. These sump indeed is full of water
Relay is electromechanical not a triac
The processor...
-
D
DP reacted to
jj4091's post in the thread
Beko DCU 8280 with
Thanks.
Don't know anything about your machine but it sounds like you are on the right lines. The only question I would ask is when the float is...
-
D
My own appliance
Tank full light came on and dryer was not drying the clothes. Collector tank top left was empty
Removed the condenser...
