Recent content by dulwich

My central heating system pumps hot water through some of my radiators when the central heatng s turned off, it happens when we draw water off for baths and showers, I guess it has something to do with the valves any help would be great thanks...

I have a crosswater thermostatically controlled shower, in a walk in enclosure which starts off warm then goes cool and then warm again, water temp is fine at basins and bath...any ideas. Thanks

I've been told that these are good units, does anyone have any feed-back, I propose to fit the 9.5 kw to a combi system, would I expect to get good flow rate and amply supply of hot water? or would you guys suggest something else Thanks

I want to fit an electric shower, I currently have a mixer tap/shower fed from combi, can I tee into the cold water pipe that connects to the bath tap to run the electric jobby? Thanks

Hi Tony Thanks for getting back to me, just unsure what you mean by the last sentence, about repeating as with other rads...can I be a pain and ask you to explain Cheers John

when i said all is flowing well..... that was just from bleeding the rads the noise is still there!!

Hi Tony Yeah I've bleed all the rads, and all flowing well.

I havea rushing water noise coming from what appears to be the rad flow pipe in one area of the house feeding a radiator, I have turned the pump down to 2 but the noise is still there. I had a new 3 port valve fitted a few weeks ago and the noise seemed to start around that time, the pump...

Hi Tony Yep the waste flows downwards, the shower is raised but I'm not sure if the waste pipe goes up again towards the saniflo unit, as I said and you commented on it's all bl_ _ dy boxed in..I'll try the flexi wire, although I can't feel much of a gap in the shower hole.. no long hair...

Hi I have a saniflo controling waste from an ensuite shower, basin and toilet, The problem is that the shower tray is not draining quick enough, after a few minutes in the shower the drain fills up. toilet works all ok as does the sink unit, I've tried aqua vac to try sucking out any blockage...

Hi I have a back boiler that heats the water for my rads I'm planning to replace some of them, how do I drain down the system, I do have to drain as I'm fitting new tails and TRV's. I've done it before on a normal gravity system, I'm now in a bungalow so ???? Thanks