Hi,
I've recently fitted a bath as part of a renovation. Existing piping is 15mm (hot comes from modern Combi in loft). I just used 15mm to 3/4 braided hose with an isolating valve. However I've since looked at the spec of the hoses, and the bore is about 10mm. This will surely reduce flow to...
Thanks for your replies guys. I did 3 things at once, tur des the seal over as advised, closed those two openings fully shut, and screwed the float adjustment so that the tank doesn't fill up quite as much. One of those has worked as its not making the noise now!
Thank you. Do you mean the seal circled blue in my image, the bottom of the flush valve assembly? The other part (that it goes in to) seems fixed in to the bottom of the cistern
Hi all,
Baffled me this one. Just installed a new Vitra concealed cistern. Luckily not boarded up yet. Constant dripping noise which I've located to be dripping past the flush valve into the pan water (arrow on image). It's one loud drip about every 20 seconds. Assumption is that the flush...