Recent content by dya

Thanks I will try it tonight.

Hello I am using a GD48 for my house alarm system. I have the RSS for programming the panel. I whant to create a user with only arming rights on all areas. Someone knows how to do it? Thanks

Hello again Another question about gd Can I link a zone with an output, if the output is not alocated to a group? For the moment I cannot tested by myself because I can't install galaxy RSS. (actualy when I start commserv the frontshell don't come up) Thanks.

Hello, thanks for the answer Yesterday I finished late at night, I didn't try anything. I will see that monday . The firmware is 7.02. I think I can do a firmware upgrade if necesary. Thanks a lot men.

Hello guys I have a strange problem with a GD264 panel. So, when I try to set the system, a zone that is closed, change state and opens, and don't let me set the systems. I verified during the timed set if something open the zone, but nothing found. The zone is a motion detection, defined as...

Man you are the best I put a battery with 13.08 V, and now is chargeing to 14.3V Super, thanks for teh info

The fuse under the AC/tmp/+ bat - bat leades is ok Is there other fuse for the battery chargeing function?

Hello After changeing the 12V back-up battery for my alarm system, I get only 1.4 V on the battery lead (red and black wires). The rest of aux and +12V is ok, indicating 13.8 volts. Thank you

Thanks a lot I will check that today.

Ok. Thanks a lot. By the way, other cameras have the live stream? Thanks again.

Yes, I know all that with ivms 4200 My question is what is the live view resolution? Is the mainstream resolution and in this case you can change it, or is the max resolution of the camera and you cannot change it. For example, with an ip hikvision camera, managed from the browser, no nvr, how...

Hello Thank you for your answer I am working with hikvision ip cameras for the moment and I can confirm that there is no settings for live view, only mainstream and sub-stream. My guess is that the mainstream settings are for both live view and recorded. But...is only a guess, I have to be sure...

Hello It may sound stupid but I'll ask: What is the resolution of a camera in live view mode? Is the mainstream resolution? Or the mainstream resolution settings are only for recording, and the live view resolution is the maximum native resolution of the camera and cannot be changed. I allready...

Aniway....sorry, bad english, not a lot of practice:(

Exactley, thanks a lot. Well, I am a security system engineer and now I do some tests for integrating honeywell with lenel onguard for a client of mine. In my previous threads I was demanding for an upgrade of firmware because onguard is not compatibile with all firmwares from honeywell. Eny way...