ebee's latest activity

  • ebee
    ebee replied to the thread No one near me wants this job - New ground rod.
    I once ran an Earth rod as a reference for an alarm system. Old mill premises, Flagged yard and the location I used was all soil - so I...
  • ebee
    ebee replied to the thread No one near me wants this job - New ground rod.
    Have you tried to twist/slacken the old one and put a new one in its place? Basining on the assumption that the existing one had never...
  • ebee
    ebee replied to the thread Post any old song you can think of..
    Nobody done some John and Oko yet? :giggle:
  • ebee
    ebee replied to the thread Back box screw.
    Hm I will have to try it sometime John, by saying I had never considered it I meant that I had never given that one a serious thought...
  • ebee
    ebee replied to the thread Oven separate hob.
    Well if it fits into the standard cooker calc by load and you are sure that the connectors will fit and carry the max current (depending...
  • ebee
    ebee replied to the thread Different to us but interesting.
    Interesting!
  • ebee
    ebee replied to the thread Is it just me.
    Was a Horsepower 746 Watts or somesuch bak in the day?
  • ebee
    ebee replied to the thread Back box screw.
    No, I had not atualy considered that because of the oval only two sides of the hole might fit but the other two woulld be sloppy. if...
  • ebee
    ebee reacted to Ragnar_AT's post in the thread Back box screw with Like Like.
    I found them for 7p apiece but with £ 5.25 p&p from a UK online store. Unless you might need them for something else in the future a new...
  • ebee
    ebee reacted to Ragnar_AT's post in the thread Back box screw with Like Like.
    You can buy threaded brass inserts that are meant to be melted into thermoplastic materials but I suppose they could be epoxied into any...
  • ebee
    ebee reacted to robinbanks's post in the thread Back box screw with Like Like.
    Last time I had this problem I took the rough route of cutting down a wood screw to length and grinding the head smaller. Pete’s...
  • ebee
    ebee reacted to morqthana's post in the thread Removing rubber sheath with Thanks Thanks.
    I as just thinking to avoid unnecessary joints. But thank you anyway for your helpful, constructive, and civil comment.
  • ebee
    ebee replied to the thread Back box screw.
    Like John says replacing the whole back box would be the sensible option if you can. However I would say that wouldn`t I ? (Being an...
  • ebee
    ebee replied to the thread soldering AAA batteries.
    If you try hard enough to be correct then you`ll always suceed in infuriating somebody anyway. I used to know somebody who thout some PC...
  • ebee
    ebee replied to the thread Is it just me.
    Nice one Eric :giggle:
Show older items
Back
Top