Yes, still got a thermal store, system is drained down so I could remove the leaky F&E. I contacted Gledhill about a replacement copper one and they have said I don't need a copper or metal one as they are used for uncontrolled heat sources not a conventional gas boiler system with thermostats...
Hi all, my system has a copper feed and expansion tank as originally supplied and fitted in conjunction with a Boilermate 2. The F&E tank has started to leak, it has a series of pin holes in it, any idea what would cause this? I'd understand it it was a ferrous metal or an old galvanised tank...
Hi all, I had my boilermate 2 replaced few months back with an advanced appliances thermal store (TSDC140). It's been working fine up till now but over the last few days I've noticed the boiler firing up a lot and our gas usage increasing. I've checked the metal F&E tank and its full of very hot...
Its on a thermal store system, no 3 port valves, just a pump for the boiler flow, and another for the heating. When the store calls for heat the boiler pump starts but the upstairs rads get hot, none of the other rads.
Hi all, can anyone identify the manufacturer of the valve in the attached photo, I'm hoping the B within a hexagon is a clue. It's playing up, letting hot water into the upstairs radiators when the hot water is being called for but not the heating.
:-)
They say sarcasm is the lowest form of wit, but lets see if I can match your level of it.
Are you an aforementioned "professional", complete with your own selection of specialist tooling? Maybe you hoped I would bow down to your superior knowledge, marvel at your collection of basin...
The plumbing wont be a problem, its just the lack of access to remove/fit new, and the unusual tooling required! It looks like the sink has been siliconed onto the worktop, no fixing clips to be seen.
Hi, our existing mixer tap is leaking. I have bought a replacement as I couldn't see a way of dismantling the existing one to change the ceramic washers (if at all possible). The sink it's going on is a 1.5 bowl ceramic. Is it possible to change the tap without removing the sink, or will it be...