Recent content by Embee2

  1. E

    Galaxy G2-20 with LCE-01 Ethernet Module

    Thank you for providing more colour on those points GalaxyGuy. Fingers crossed configuring the LCE-01 should run smoothly from here.
  2. E

    Galaxy G2-20 with LCE-01 Ethernet Module

    Thank you GalaxyGuy. You are a fount of knowledge. 1. & 2. All seems straightforward. Thanks for confirming the connections. 3. For my information when would this other - + connection be used? For example when using a zone expander? 4. Ok. Not experiencing any issues. From my pic it looks...
  3. E

    Galaxy G2-20 with LCE-01 Ethernet Module

    Hello I have a Galaxy G2-20 and an LCE-01-4 ethernet module to make use of ethernet functionality with an iPhone. Before connecting it up I wanted to check a few things. Enclosed is a picture of my Galaxy G2-20. It has a C020-01-C PCB with a Mk7 keypad and V2 wireless receiver connected...
  4. E

    Galaxy G2-20 without a telephone line

    Hello I went for an LCE-01 module to make use of ethernet functionality with an iPhone. Before connecting it up I wanted to check a few things. Enclosed is a picture of my Galaxy G2-20. It has a C020-01-C PCB with a Mk7 keypad and V2 wireless receiver connected. Currently the keypad and V2...
  5. E

    Galaxy G2-20 without a telephone line

    All sorted thanks alan333
  6. E

    Galaxy G2-20 Printing System & Diagnostic Information

    Thank you Galaxy Guy. Totally understand your point, I was just curious if anyone had actually used this A228 (correction) connection. Regards Embee
  7. E

    Galaxy G2-20 Printing System & Diagnostic Information

    Hello On a Galaxy G2-20 under option 57 you can print system programming and diagnostic information to a serial printer from the program header. The installation guide states that you need a printer lead (part number A225) to do this. I have a few questions that I hope someone can help with...
  8. E

    Galaxy G2-20 without a telephone line

    Hi, found how to get the software version. Look under menu 23 "Display Version". Regards Embee
  9. E

    Galaxy G2-20 without a telephone line

    Hi alan333. Thank you for your input. Your contentment with the LCE module is making me lean more in that direction. Just seen the iPhone app which is exactly what I am looking for. I notice for G2 panels the iPhone app requires firmware version 1.53+ or above. When I look at my panel it...
  10. E

    Galaxy G2-20 without a telephone line

    Thank you for responding GalaxyGuy. Your involvement in the development of the LCE module is a big plus as you are knowledgeable. I sense that you are very objective, so I will take your word as gospel. The limitations of the GSM dialer are clearly apparent. The main feature that I see is...
  11. E

    Galaxy G2-20 without a telephone line

    Hello I have a Honeywell Galaxy 2-20 which uses wireless PIRs and sends alarm notifications via a telephone line. I am interested in a) being able to control the unit remotely (eg on an iPhone or virtual keypad) b) receiving text (and possibly email/call) messages on alarm (and possibly...
  12. E

    Sleepers for Edging of Artificial Lawn

    Hi Foxhole, your garden looks lovely. Do you have pine or oak sleepers? Also, have you actually changed your sleeper? I am curios because the sleeper is acting as a retaining wall/edge when artificial turf is laid. Does the MOT sub 1 base & granite sand become set in place allowing sleepers to...
  13. E

    Sleepers for Edging of Artificial Lawn

    Hello I hope that someone can advise me or share their experience if a similar situation has occurred with them. I am getting an artificial lawn laid & will use sleepers for the edging. Sleeper lengths planned are 3.6m and 4.8m and I was pretty much committed to pressure treated pine sleepers...
  14. E

    Galaxy G2-20 PIR Problem

    Sir GalaxyGuy thank you very much for your help. To say I really appreciate it is an understatement. I’ll be changing the main battery soon. Regarding Q2 thanks again to sparkymarka for suggesting a battery change could rectify the RF error message.
  15. E

    Galaxy G2-20 PIR Problem

    GalaxyGuy - a big thank you! It's working :-) Much appreciated. And you as well sparkymarka. My curious nature still means that I have a few questions that I hope with your name you can answer. Q1. The codes “RF FAIL Zn:1001 etc" were only visible after I activated the PIR supervision (52...
Back
Top