ericmark's latest activity
-
ericmark replied to the thread Slow filling toilet.It does seem there are removable parts on some, so with header tank fill it has a larger opening to mains fill, but not all. -
ericmark replied to the thread Stay petrol or switch to battery garden tools?.I have Aldi petrol and Lidi battery, the Aldi has a blower as part of the kit, and the Lidi has a brush cutter, so not quite the same...
-
I have extended the paved area with slabs and brick sets, there are a few slabs which are covered with a moss or lichen, and need to...
-
-
If a hole is being cored and the tube snags for whatever reason on a gun with no clutch, then it can break a wrist.
-
ericmark replied to the thread PAT Testing cost..No, we were working 12-hour days. Plus overtime.
-
ericmark replied to the thread Slow Hot Water vs Water Heater.This is what I thought also. This is the real life thing. Very well put. How much hot water is used each time, will change as to if...
-
-
ericmark replied to the thread The ultimate Parkside/Ryobi flex?.Oh, well, my Parkside uses two batteries, and they are 20 volt each not 18 volts, so the machine runs on 40 volts. So can't really see...
-
ericmark replied to the thread PAT Testing cost..I charged by time. The batching plant at T5 when working there, would take two of us, two days to test, it was defiantly portable, the...
-
ericmark replied to the thread Drayton Digistat +2 Reciever been BINNED!!....Or has it?.Not quite as good as it seems. If the radiator is on an outside wall, it can be cooler by the wall so the TRV head does not represent...
-
ericmark replied to the thread Core drill ?.This is the important bit, my SDS has no clutch, not superpower full so it would stall rather than turn me around with the drill, but...
-
ericmark replied to the thread Picture lights and ceiling track lights.I also have a problem in my kitchen as no good assess to the ceiling. So, looking at lighting track. It seems a good method to run the...
-
-
ericmark replied to the thread Drayton Digistat +2 Reciever been BINNED!!....Or has it?.All my TRV heads exercise the pin once a week. So the pin will not stick. Yes, expensive since Brexit, need a hub for the first one. And...
-
-
ericmark replied to the thread Question about paperwork.Hardly, GZ4 pipeline Algeria, Falkland Islands Airport, Heathrow Airport, Hong Kong tunnel boring machine, Sizewell 'B' Power station...
-
ericmark replied to the thread Question about paperwork.I am an industrial electrician, petrochemical, shipbuilding, power stations, pipelines, airports, even some shop fitting, but house...
-
ericmark replied to the thread Question about paperwork.Then not really your problem. I must admit the work I had done, the EIC was rather lacking in info. But it does what I want, so no problem.
