UPDATE
Thanks for all your advice..
I used the drain snake on the pipework for the 1/2 sink starting further on down from the u bend... - definitely came across some fatberg type thing in the vertical pipe.
I seem to have dislodged that enough.
I then took off the access cap and ran the drain...
Thanks for all the tips guys. I have used a plunger yes, for a long time, and also tried soda crystals. Today I will proceed by:
1)Buying a drain snake.
2)Pushing it through the 1/2 sink plug hole and seeing how far it goes.
3)If that doesn't work, remove the access point and use the drain...
Thanks Andy and Hugh, I will give this a go tomorrow.
I haven't ever removed that pipe access cover to the left, do they typically just screw off? It seems quite stiff and I wouldn't want to force it and break it!
Thanks, Dan
Hi all!
I've recently moved and the home I moved into has a kitchen sink with a 1&1/2 bowl kitchen sink.
I have a 1&1/2 kitchen sink bowl. The 1/2 sink waste is completely blocked and doesn't drain at all. The full sink bowl runs with no problem whatsoever.
I've removed all the pipes from...