sorry i forgot to mention the pressure has gone to nearly 2.3.
To be honest i was having problems before.
I was trying to fix a banging noise to begin with. and realised the pressure was low so i let more water in and thats when i realised there was a leak as the pressure wasnt going up at...
Hello i have Halstead Finest Platinum i was having a problem with pressure before but that was a leak in a pipe which has now been fixed :)
Unfortunately my boiler works for around 15-20 mins then starts to make a hissing noise and if i put my hand above the boiler i can feel hot air (maybe...
I just took the top cover off the boiler to see what i could see when it was open a made sure what looks to be like the fan for the air vent was spinning which i could move freely. I then turned it on again i got a slight metal squeeling noise then the light stayed on red and the pressure at 0...
Halstead finest platinum banging
As soon as i switch it on it will start to bang loudly i then turn it straight off as i dont want to cause any damage. are there any simple causes for the problem or do i need a Pro to fix it?
Hola
I am needing a new bolier as mine as a bit old and broken and having a new bathroom fitted and will need the capacity to be able to power 7 radiators and a steam shower have been told a worchester bosh will do the job and they will install it for 1.5k does this sound reasonable or is it...
My Halstead finest platinum keeps loosing pressure.
Last time the pressure dropped down to 0 i topped it up with water and it was ok for about 2 days and now is dropping back down to zero any ideas?
Thanks i will try this when i get home sorry if i sounded a bit stupid its just i dont know a thing about boilers so was a bit nervouse to do something i wanst sure of.
ok the filling cable is connected and the water still leaks when the boiler is off. Next to the central heating flow there is a switch/tap which you can move this is what i have to change to stop the water leaking out through the over flow, im not sure which way its supposed to be pointing as i...
The filling loop is connected, do i remove both ends or just the one? and if it doesnt spirt have i fixed it?
Im new to this first time ive actually looked at a boiler apart from to change the temp