Our bathroom has had a tile floor layed, this has raised the level of both the wc and basin by 1cm. Is there any easy way of extending the taps and the cistern valve to meet the original pipework without cutting the pipes. Thanks
Thanks Ban All Sheds I believe you have the solution, just spoken to the distributer and local Hager supplier who recommend the same.
I will pick up the breaker and try it tomorrow.
Still having issues with this light.
When connected to the ceiling rose the light works when switched on but trips the ring when turned off and back on a second time. The ring is controlled be a MT106 Hager trip switch.
When the light is connected to the normal 13 amp socket is performs...
Sorry I seem to be confusing things.
I have connected the light unit as before and inserted one of eight bulbs into the light. It worked once only. Switching the light off and back blew the fuse.
Ok
I reconnected everything and removed the bulbs.
Switched on and off removed and tested fuse. The fuse was still working.
Put one of the eight bulbs in, replaced the fuse.
Switched on great its working.
Switched off and back on now no light checked fuse the fuse has now blown.
So the...
Trying to install a new light fitting upstairs.
Removed old fitting, and installed new fitting.
Ceiling rose contains the following wires
4 red wires
3 black wire
1 black/red
4 green/yellow
All black wire connected together and to the new light. Neutral
One Black/red wire connected...