Recent content by everyonelovescheese

I just drilled a test hole, its plasterboard then wood,around an inch thick, so it should be easy enough to mount it.

As in a big metal stand essentially? Would probably work, but would be quite cumbersome. 17kg isnt too bad, There should be a way to mount it onto that, maybe using the roof as a support somehow?

Hi all Not sure if this should be in this section, seemed like it could go in many. I have just bought a split type AC for my main living space. Its a big chungy 24,000 BTU inverter sytem which should be lovely! The indoor unit measures 330mm(H)x1080mm(W)x222mm(D) and weighs 17KG...

Hi all I have just moved into a flat with a Neff integrated dishwasher (S5943X2GB). It runs for absolutely ages and doesnt heat the water. I have had the side off and checked the following: Heater element has a resistance of 23 ohms. The pressure switch works properly The...

Sorry for the delay on this, I didn't see the update! I wasn't given any information by the British gas engineers unfortunately :( I don't believe they tested each socket individually (I wasn't at home watching them). He essentially said he will replace the RCD and would come back if it...

Ah yes I see what you mean. Sounds expensive either way.

I will double check to see if that is actually SPARE, I don't trust the people who labeled it in the first place. Any idea how much it would be to run another circuit from that breaker cost wise (approximately of course)

Hm, nobody has suggested that before, I assume to do this I would need a larger board as there would be no space left?

8 - 2 smart ups 2200

Hi All Our house has been plagued with a problem for a while, we have had 2 electricians come and visit who have not been able to track the issue down. The issue we have is that the RCD trips randomly. This month it has done it 3 times, twice early in the morning, and once during the day...